You are logged in as anonymous
Register
Username 
Password 
  Home History Support Articles Screenshots Download F.A.Q. Beta Area Advertise here  
SpeedFan 4.52
Copyright 2000-2017 by Alfredo Milani Comparetti
Donate something for SpeedFan :-)

ADM1030 (sensor)

Added by ALMICO on 11 may 2002


Description: 
The ADM1030 is an ACPI-compliant two-channel digital thermometer and under/over temperature alarm, for use in computers and thermal management systems. Optimized for the Pentium III, the higher 1C accuracy offered allows systems designers to safely reduce temperature guardbanding and increase system performance. A Pulsewidth Modulated (PWM) Fan Control output controls the speed of a cooling fan by varying output duty cycle. Duty cycle values between 33%-100% allow smooth control of the fan. The speed of the fan can be monitored via a TACH input for a fan with a tach output. The TACH input can be programmed as an analog input, allowing the speed of a 2-wire fan to be determined via a sense resistor. The device will also detect a stalled fan. A dedicated Fan Speed Control Loop provides control even without the intervention of CPU software. It also ensures that if the CPU or system locks up, the fan can still be controlled based on temperature measurements, and the fan speed adjusted to correct any changes in system temperature. Fan Speed may also be controlled using existing ACPI software. One input (two pins) is dedicated to a remote temperaturesensing diode with an accuracy of +-1C, and a local temperature sensor allows ambient temperature to be monitored. The device has a programmable INT output to indicate error conditions. There is a dedicated FAN_FAULT output to signal fan failure. The THERM pin is a fail-safe output for over-temperature conditions that can be used to throttle a CPU clock.


Feature Date Vote Voted by Comment
Power 22 mar 2008 10 MANOLO_CARACOL
Now everything is working properly. User sometimes is stupid
14 nov 2004 5 GROVE
My notebook has this sensor too... it give the possibility to change fan rpm, but rpm sensor is always at 0.
27 aug 2004 4 TEAM11
My computer has this sensor and it seems to work but it keeps reporting my fan rpm as 0 even when I set it to 100%
Reliability 22 mar 2008 10 MANOLO_CARACOL
Now everything is working properly. User sometimes is stupid
25 feb 2006 2 ROMEO
Rarely does this sensor work. I don't know why?
Ease of use 22 mar 2008 10 MANOLO_CARACOL
Now everything is working properly. User sometimes is stupid
Features 22 mar 2008 10 MANOLO_CARACOL
Now everything is working properly. User sometimes is stupid


Google      Web www.almico.com
Page generated in 0.0617 seconds Powered by (new)... Page viewed 7950915 times
United States Did you know that SpeedFan has an RSS feed feed? Privacy policy